Tag Archives: combo truck services for Property Managers

Property Managers: Do Your Property Maintenance Before the Rain Falls

When you manage a property it is important to stay ahead of the upkeep or else it can pile up and cost you a lot more in the long run. Preventative maintenance will benefit all property managers, but you need to know when to do it and what you should be looking for. Things like the septic system and the structure of the building should be checked frequently just so you know how they are and if they are in good working order.

Check the Roof
Roofing starts to go bad over time and if you are not aware that it is bad, this can lead to water damage on the property. You want to check your roof at least twice a year just to make sure that nothing needs to be replaced or repaired. If things are looking bad, simply have them taken care of right away to prevent further damage.

Edenflo Property ManagementLook at Your Landscaping and Yard Features
Things like plants and trees, pools, fountains, and ponds all require some type of maintenance to maintain them. For example, hydro excavating can be done on all of these to keep everything in good working order and to remove tree stumps that are difficult and deep, according to EdenFlo. When it comes to plants, you want to know how to properly care for them during all four seasons.

Your Catch Basin
Most people keep an eye on the septic tank, but the catch basin tends to be forgotten about sometimes. Companies like Edenflo will be able to provide maintenance for your catch basin so that it is always in good working order and not causing problems for you or your tenants. A professional can give you information on how often maintenance should be performed.

Use Hydro Excavation and Hydro Flushing to Safely Expose Sensitive Utilities

Hydro evacuation is a fast process that uses specialized water evacuating equipment that can quickly vacuum up debris, sludge, dirt, and silt safely. The process can be completed until the required depth and width has been achieved. The process of hydro evacuation offers a non-destructive solution that incorporates pressurized water and a high level vacuum system as an easy solution for digging.

The process of hydro excavation also creates a quick way to visually observe any existing underground utility that could be harmed in a traditional evacuating (digging) process. It can significantly outperform all traditional excavators, augers, and horizontal impact drilling rigs. Typically, a conventional digging project would require bulldozers, augurs, bobcats and shovels. Every one of these tools can cause significant damage to many of the hidden utilities including electric cables, optic cables, water mains, sewage pipes, and most importantly, gas pipes.

Minimizes Construction Delays
Many times, construction needs to be delayed, when an unexpected underground utility is located during the construction phase of any small or large project. This is where the process of hydro flushing and hydro evacuation can safely expose the sensitive utilities.

Because the equipment has the ability to use non-destructive methods to evacuate most holes sizes, it can be used to quickly set signpost, utility poles, concrete forms, and anchors in the exact position where required, without any potential to damaging sensitive underground utility or wires.

Because the system can so quickly evacuate all loosened debris, silt and sludge it provides the optimal working area. It minimizes the extensive restoration costs to bring the site back to its original condition.

The hydro flushing equipment also has the ability to remove any buildup scaling, sludge or debris from the interior of a pipe or drain to remove the blockage immediately.

Don’t delay and give us a call for a FREE quote and consultation.

Property Managers: Schedule Hydro Flushing to Remove Blockages

The drainage pipes in older structures often require expert attention, especially when there is a need to blow out drain lines. Many property owners across British Columbia deal with a variety of plumbing issues where the water lines are not properly feeding the structure with enough pressure, or the drain system simply has built up layers of crusted debris making it impossible for the sewage to pass.

Assessing the Problem
Using advanced equipment, a trained technician can inspect and evaluate the problem. They can use high-pressure flushing equipment to thoroughly clean out any line from ½ inch in diameter, up to 8 foot wide storm drains. By using hydro equipment, the property manager can avoid the need to tear up drain lines and water lines that might be penetrating through the structure’s foundation.

Debris Sludge and Grease
Usually, the single largest cause for any drain line blockage in a commercial or residential property is due to the buildup of debris, sand, sludge or grease, or a combination of two or more components. By using high pressure water jetting, the technician can easily penetrate the grease and emulsify it. The process also breaks up any debris and sludge and is even powerful enough to pulverize roots. The jetting water can also cut away any of the hardened packed scale and flush out the entire system.

The process of using high pressure water flushing equipment is very economical, highly efficient, and safe for the environment. It is the most effective way to clean out sewer and drain pipes.

Routine Maintenance
When used as a preventative measure, hydro flushing offers an easy way to prevent against the buildup of mineral deposits and grease, along with intense scaling caused by decomposing debris and sludge. Any clogged can cause significant problems that could easily cause significant loss to revenue and customers.